Build a field system
01 / 08 Battery + USB
Charge the battery or draw power from it. SMBus exchanges battery status and charging requirements, with Level 3 charging for compatible smart batteries.
Deliver or receive power with USB-C Power Delivery, supporting both SPR and EPR. Exchange USB 2.0 data and connect devices through the USB hub.
SMBus Level 3 charging · USB-C SPR + EPR
02 / 08 Generator
A compatible DC feed from a diesel generator can power the computer and charge the battery at the same time. The battery provides UPS backup when the generator stops.
3.3–62 V DC · Up to 500 W per port, in or out
Use a suitable DC output. Power is subject to each port’s voltage and current limits.
03 / 08 Drones
Charge multiple drone batteries at the same time through compatible chargers. Share available power between connected loads and monitor each port as the next flight gets ready.
Multiple chargers · Independent port control
04 / 08 Solar
MPPT follows the solar panel’s maximum power point as sunlight changes. The hub can use variable renewable sources alongside batteries and other available power.
Solar input · Maximum power point tracking
05 / 08 EUD
Use an end-user device to view measurements and operate the hub. The same field connection carries its data and charges the device, giving you a larger screen where you need it.
NW3 EUD-HOST · Data and charging
06 / 08 HVDC link
Connect another FPH-462 over the HVDC link and share power with equipment at a distant position. Several hubs can form a small microgrid, supplying and charging units nearby.
400 V DC · Approximately 1 kW · Up to 1 km
2.4 A link limit: 960 W at nominal 400 V. Cable, load and configuration determine delivered power and reach.
07 / 08 6T battery
Charge a compatible 6T vehicle battery or draw power from it while exchanging battery information over CAN. USB, SMBus, CAN and RS-485 let the wider system communicate with different equipment.
USB · SMBus · CAN · RS-485
08 / 08 Ethernet
Connect FPH-462 to an Ethernet network for monitoring, remote control and firmware updates. Every addition remains part of one connected power-and-data system.
Ethernet / LAN · Remote control · Updates
Remote webserver / 24-hour visibility
Monitor every port around the clock while connected. Review voltage, current, power, temperature and faults, follow operating history and control the FPH-462 remotely.
Connect your FPH-462 ↗
The field connection
Keyed Nett Warrior connectors carry energy and communication together. Each of the six ports can receive or deliver power through a compatible cable and device.
The HVDC link and Ethernet use different mechanical keying, preventing their connectors from being plugged into the wrong interface.
See the supported interfaces ↗
From the bench to the field
A compact aluminium enclosure, physical controls and sealed connections bring the system together. Talk with our engineers about your equipment, integration and field-trial requirements.
Created in cooperation with FFI · Designed in Norway · Manufactured by Norautron
